Equipment Manufacturing Corporation

Santa Fe Springs, CA                                        (888) 833-9000              

Water Eater Model 125E®

Wastewater Evaporator

The Model 125E is an electrically heated waste water evaporator designed for the small to medium sized generator of wastewater. It comes in two models, the Model 125E Carbon Steel version and the Model 125E-SS 316L Stainless Steel version (tank, floor, lid, covers, and stack are 316L SS). Installation is easy consisting of only an electrical hookup and a 10" diameter vent stack. The unit can be filled three different ways: (1) Using the supplied 2" coupling on the top of the unit; (2) Remove the lid and manually pour in fluid; or (3) Using the optional 70 GPM self priming fill pump. After an initial heat up time of approximately one hour, the Model 125E will evaporate 12 gallons per hour of water. The Model 125E water evaporator will automatically shut itself down via a low level control. A secondary high temperature shutoff is also provided. When a cycle is completed the waste material can either be drained via a 2" drain opening, vacuumed out of the unit through the removable lid, with a wet/dry vacuum or pump, or, if it is a solid material, scooped out.

12 Gallons / Hour
12 Gauge Tank w/ 1" Insulation,
16 Gauge Painted Exterior
Adjustable Weir Ball Valve
2" NPT Coupling
Elevated, Electric Heating System, 27,000 Watts
38"L x 34"W x 46" H
38"L x 41"W x 46" H (with Pump or AFS)
240 Volts/3 Phase/68 Amps
480 Volts/3 Phase/34 Amps (Optional)
Funnel Floor, 2" Drain with Plug
10" Diameter
500 Lbs.
WARRANTYOne Year Parts & Workmanship. Labor & Corrosion excluded.

Water Evaporator 125E

  • 12 GPH
  • Electric Heat
  • 125 Gallon Capacity
  • Carbon Steel - $6,995
  • Stainless Steel - $8,995

Evaporator Model 125E Price Quote

Water Eater® Info
Price List Options Specifications Features Photo Gallery Manual & Warranty

Features & Benefits

  • Heavy Duty 12 Gauge Tank, Covers, & Stack (Carbon or 316L Stainless Steel).
  • Available in 240V or 480V configuration.
  • Automatic Shutoffs (Low Level Control & High Temperature Shutdown) for unattended operation.
  • Simple one button ON/OFF operation.
  • Removable Lid and obstruction free tank floor for fast and easy cleanout.
  • Fully Insulated Tank.
  • Variable Weir skimmer standard on all units.
  • Power exhaust allows venting to outdoors.

  • Quality polyurethane finish.
  • Tank Top at convenient 36” height to facilitate cleanout.
  • Easily installed requiring only a vent stack and electrical hookup.
  • Industry Standardized Components.Most parts are available from major industrial supply houses. You are not held hostage by high mark up on “captive” parts only available by the original equipment manufacturer.
  • Optional 70 GPM Self Priming Feed Pump
  • Optional Auto Fill System
  • One Year Warranty on Parts & Workmanship

Water Eater®

Wastewater Evaporator Model 85E Water Eater

  • 5 GPH
  • Electric Heat
  • 85 Gallon Capacity

Water Eater® 125E

Wastewater Evaporator Model 125E Water Eater

  • 12 GPH
  • Electric Heat
  • 125 Gallon Capacity

Water Eater® 120G

Wastewater Evaporator Model 120G Water Eater

  • 15 GPH
  • Natural Gas/Propane Heat
  • 120 Gallon Capacity

Water Eater® 240G
Wastewater Evaporator Model 240G Water Eater

  • 22 GPH
  • Natural Gas/Propane Heat
  • 240 Gallon Capacity

Water Eater® 375G

Wastewater Evaporator Model 375G Water Eater

  • 40 GPH
  • Natural Gas/Propane Heat
  • 375 Gallon Capacity