|
Quality
Wastewater Evaporators & Automatic Parts Washers since 1981.  |
COMPARE & SAVE!
What’s the true value of an EMC Automatic Parts Washer? COMPARE our features with other manufacturers.| EMC | |||||
| 1. EQUIPMENT COST (Model_____________) | |||||
| 2. INSULATED WASH TANK | Included |
||||
| 3. OIL EATER SKIMMER | Included |
||||
| 4. FULL FLOW (100%) FILTRATION | Included | ||||
| 5. EASY RACK PARTS FIXTURING SYSTEM | Included | ||||
| 6. LOW WATER SHUTDOWN SYSTEM | Included |
||||
| 7. EASY CLEANOUT FUNNELED FLOOR | Included |
||||
| 8. 13.5 KW HEATING SYSTEM | Included |
||||
| 9. CONVERTIBLE BETWEEN 1 & 3 PH | Included |
||||
| 10. PANEL MOUNTED THERMOSTAT | Included |
||||
| 11. REDUCED VOLTAGE CONTROL CIRCUIT | Included |
||||
| 12. 7-DAY HEATING SYSTEM TIMER | Included |
||||
| 13. 2" DRAIN PORT WITH BALL VALVE | Included |
||||
| 14. MANIFOLD CLEANOUT PORT | Included |
||||
| 15. PUMP INLET STRAINER | Included |
||||
TOTAL COST |
See #1. |
AND Don’t forget these DAY-to-DAY Operating Savings!
INSULATED TANK & DOOR: Who buys an un-insulated hot water heater? So why would you buy an un-insulated parts washer. Save $50 or more each month in reduced electrical/energy costs and eliminate the hazard of hot, unprotected tank surfaces.
REDUCED CLEANOUT TIME: No more scraping sludge out of hard to reach corners and into small port drains. The 100% full flow filtration virtually eliminates sludge cleanout. Simply open the 2" ball valve drain and the funneled floor lets gravity to the rest. Reduce cleanout time by up to 90%! A recent report contracted for by the U.S. Air Force stated that maintenance time was reduced from 340 to 4 hours per year over their current parts washing equipment. "OFF-THE-SHELF" COMPONENTS: Don’t be held hostage by expensive and hard to get OEM parts. Practically all of the components that EMC uses are easily available from local industrial distributors or nation distributors such as W.W. Grainger’s and McMaster-Carr.