Equipment Manufacturing Company

Los Angeles, CA  |  (562) 623-9394  |  sales@equipmentmanufacturing.com

Powerjet®

Parts Washers Features


THERMAL GUARD ENERGY SAVING SYSTEMInsulation Parts Washer

All Powerjet® Cabinet Style Parts Washers are fully insulated for energy efficiency. Who would purchase an un-insulated hot water heater? Combined with our cabinet vent damper and positive door seal, the Powerjet is designed to minimize energy costs while allowing you to maintain your optimum operating temperature.

SOLUTION SAVER FLUID MANAGEMENT SYSTEM
  
The Powerjet® comes with many features that keep your wash solution clean and prolongs the useful life of the solution. First, there is a 100% full flow filtration. Since your parts are only as clean as your wash solution, we have an economical, reusable bag filter system. Among the advantage are the prevention of fouling cleaned parts, the elimination of manifold jet clogging, and dramatically extended solution life. In addition, there is a variable weir skimmer for removing free floating material.
filters-parts-washerVariable Wier Skimmer Washer


OVERHEAD TURNTABLE DRIVE SYSTEMParts Washer Drive System

The Powerjet® uses an overhead drive system for the wash turntable. The impedance protected gear motor and bearing are located out of the solution. This eliminates the need for drive wheels used by many manufacturers that require routine replacement. And the suspended turntable is able to support weights with less strain and wear. The EMC turntables rotate smoothly no matter where the load is located.

EASY RACK UNIVERSAL FIXTURING SYSTEM

The Easy Rack® universal fixturing system provides limitless parts loading combinations. Quickly position and grip virtually any part for optimum nesting and cleaning exposure. Often rivaling conveyor washers in capacity, the Powerjet with its multi level loading capabilities outputs many more parts than a traditional washer.
Multiple Shelf Parts Washer Adjustable Shelf Parts Washer

HEAVY DUTY CONSTRUCTION

The Powerjet® is designed to be long lasting with minimal maintenance.  
   -  12 gauge mig welded tank with 16 gauge exterior painted insulated tank
   -  120 gpm heavy duty pump
   -  8" door hinges with lubrication fitting on heavy box tubing door frame
   -  2" full ported ball valve drain and 2" full ported oil skimmer outlet


LOW WATER SHUTDOWN SYSTEM

All EMC Powerjet® Automatic Parts Washers have a low water shutdown system to protect the heater system from a low water condition that can burn out the heaters.

7 DAY HEATING SYSTEM TIMERParts Washer 7 Day Timer

All EMC Powerjet® washers come with a 7 Day Heating System timer. Enables the washer to turn on or off unattended. Allows the machine to be hot when you arrive in the morning and shut down at closing time.


HIGH VOLUME PUMP & MANIFOLD SYSTEM

Our high volume pump coupled with our straight stream manifold system quickly cleans your parts with minimal downtime for nozzle cleanout or pump repair. The 120 GPM pump flood washes your parts under low pressure. Low pressure drastically reduce maintenance time on pumps, motors, and spray jets. See our Product Information Bulletin - Spray Jets & Automatic Parts Washers.

13.5 KW HEATING SYSTEM

When you want to use your parts washer, you normally want to use it NOW! Our 13.5 kilowatt heating system quickly heats up the solution to operating temperature.

OFF THE SHELF COMPONENTS

There's nothing we hate more than buying equipment with lots of proprietary parts. Not only are the parts usually expensive, but they can sometimes take months to procure. All of our components such as contactors, motors, switches, heaters, are easily available through local industrial supply companies such as Grainger or McMaster-Carr and we are more than happy to supply you with the part numbers.

PROVEN DESIGN

We've built thousands of parts washers over the last 35 years, always sticking to our philosophy of building quality, production style machines. We've made a few improvements and modifications over the years, of course, but you can be sure that the model you purchase from us has been field tested and proven in a variety of applications and for many years.

NO PROPRIETARY DETERGENT/SOAP REQUIRED

You are not required to use any proprietary detergent/soap in our Powerjet® Parts Washers. We recommend you contact your current chemical/coolant/lubricant suppliers and see if they have a "Spray Washer" detergent. A spray washer detergent should contain defoamers, rust preventatives, and be safe for the material you are cleaning (an aluminum safe detergent usually works well).

Powerjet® 2846

Powerjet® 2846 Automatic Parts Washer

  • 28" x 46" tall (other heights available)
  • 50 gallon capacity
  • 13.5 kW

Powerjet® 4046

Powerjet® 4046 Automatic Parts Washer

  • 40" x 46" tall (other heights available)
  • 100 gallon capacity
  • 13.5 kW

Powerjet® 5846

Powerjet® 5846 Automatic Parts Washer

  • 58" x 46" tall (other heights available)
  • 200 gallon capacity
  • 27 kW