WATER EATER Model 375G
Wastewater Evaporator

The Model 375G is a natural gas or propane heated waste water evaporator.  It is available in two models, the Model 375G Carbon Steel version and the Model 375G-SS 316L Stainless Steel version (tank, floor, lid, covers, and stack are 316L SS).  Typical applications include minimizing wastewater from machining operations, parts washing equipment, compressor condensate, mop water, die cast solutions, and many other water based waste streams.  Installation is easy consisting of only a 120V electrical hookup, a 16" diameter vent stack, and a 3/4" standard pressure gas line. The unit can be filled three different ways: (1) Using the supplied 2" coupling on the top of the unit; (2) Remove the lid and manually pour in fluid; or (3) Using the optional 70 GPM self priming fill pump.  After an initial  heat up time of approximately one hour, the Model 375G will evaporate from 40 to 55 gallons per hour of water.  The Model 375G will automatically shut itself down via a low level control. A secondary high temperature shutoff is also provided. When a cycle is completed the waste material can either be drained or vacuumed out of the unit through the removable lid, with a wet/dry vacuum or pump, or, if it is a solid material, scooped out. To facilitate cleanout, the interior tank of the 375G is sloped towards the 2" outlet.  The "U" shape burner tube is located around the perimeter of the process tank allowing access between the tubes5E will automatically shut itself down via a low level control. A secondary high temperature shutoff is also provided. When a cycle is completed the waste material can either be drained via a 2" drain opening, vacuumed out of the unit through the removable lid, with a wet/dry vacuum or pump, or, if it is a solid material, scooped out.

Model 375G Features & Benefits

• Heavy Duty 12 Gauge Tank, Covers, & Stack (Carbon or 316L Stainless Steel)

• Adjustable Burner (Natural Gas or Propane) with electronic ignition, flame rectification system, and air pressure sensor.

• Automatic Shutoffs (Low Level Control & High Temperature Shutdown) for unattended operation

• Simple one button ON/OFF operation

• Removable Lid for fast and easy Cleanout.

• Fully Insulated Tank.

• Variable weir oil skimmer.

• Power exhaust allows venting to outdoors

• Quality polyurethane finish

• Easily installed requiring only a vent stack, electrical hookup, and gas line.

• Industry Standardized Components.  Most parts are available from major industrial supply houses.  You are not held hostage by high mark up on "captive" parts only available by the original equipment manufacturer.

• Optional 70 GPM Self Priming Feed Pump

• Optional Auto Fill System

• One Year Warranty on Parts & Workmanship

Model 375G Specifications

Model 375G Price Schedule

FOB: Santa Fe Springs, California. All prices in U.S. Dollars. Prices and specifications subject to change without notice. Delivery times may change due to previous customer orders. Special packaging or electrical requirements  for  international shipments quoted on a per case basis. For additional ordering information go to EMC Home Page or call (888) 833-9000.