Waste Water Evaporator Model 125E: Pricing and Specifications

The Model 125E is an electrically heated waste water evaporator designed for the small to medium sized generator of wastewater. It comes in two models, the Model 125E Carbon Steel version and the Model 125E-SS 316L Stainless Steel version (tank, floor, lid, covers, and stack are 316L SS). Typical applications include minimizing wastewater from machining operations, parts washing equipment, compressor condensate, mop water, die cast solutions, and many other water based wastestreams. Installation is easy consisting of only an electrical hookup and a 10" diameter vent stack. The unit can be filled three different ways: (1) Using the supplied 2" coupling on the top of the unit; (2) Remove the lid and manually pour in fluid; or (3) Using the optional 70 GPM self priming fill pump. After an initial heat up time of approximately one hour, the Model 125E will evaporate from 10 to 14 gallons per hour of water. The Model 125E will automatically shut itself down via a low level control. A secondary high temperature shutoff is also provided. When a cycle is completed the waste material can either be drained via a 2" drain opening, vacuumed out of the unit through the removable lid, with a wet/dry vacuum or pump, or, if it is a solid material, scooped out.

FEATURES & BENEFITS

Heavy Duty 12 Gauge Tank, Covers, & Stack (Carbon or 316L Stainless Steel)
Available in 240V or 480V configuration.
Automatic Shutoffs (Low Level Control & High Temperature Shutdown) for unattended operation
Simple one button ON/OFF operation
Removable Lid and obstruction free tank floor for fast and easy cleanout
Fully Insulated Tank
Variable weir oil skimmer standard on all units.
Power exhaust allow venting to outdoors
Quality polyurethane finish
Tank Top at convenient 36" height to facilitate cleanout
Easily installed requiring only a vent stack and electrical hookup
Industry Standardized Components. Most parts are available from major industrial supply houses. You are not held hostage by high mark up on "captive" parts only available by the original equipment manufacturer.
Optional 70 GPM Self Priming Feed Pump
Optional Auto Fill System
One Year Warranty on Parts & Workmanship

SPECIFICATIONS

Maximum Evaporation Rate	14 GPH: Batch Mode 10 GPH: Auto-Fill Mode
Tank Capacity	125 Gallons
Tank Construction	12 Gauge Tank w/ 1" Insulation; 16 Gauge Painted Exterior
Tank Height	36"
Heating System	Elevated, Electric Heating System, 27 KW
Dimensions	38" L x 35" W x 54" H
Utility Requirements	240/3/68 Amps 480/3/34 Amps Optional
Drain	Funnel Floor; 2" Drain & Plug
Shipping Weight	600 Lbs.
Warranty	One Year Parts & Workmanship

PRICE SCHEDULE

PART NO.	DESCRIPTION	PRICE
125E	Model 125E Water Eater Carbon Steel Tank, Covers & Stack, 12 Gauge	6,295.00
125E-SS	Model 125E-SS Water Eater 316L Stainless Steel Tank, Covers & Stack, 12 Gauge	7,995.00
480V	480 Volt Power (480/3/34 Amp)	300.00
AFS	Auto-Fill System Includes 70 SFP Fill/Cleanout Pump, High level shutdown sensor, manual pump switch, and diverter valve for concentrated liquid removal.	1,795.00
70SFP	70 GPM Fill & Cleanout Pump 70 Gallons/Minute, Self-Priming Centrifugal Pump. Mounted with momentary on/off control switch. Includes diverter valve for concentrated liquid removal.	795.00
20SDH	Hose Assembly 20' x 1�" Vacuum Hose w/Quick Disconnect Fittings, Foot Valve, and Strainer for transferring from/into tanks or drums.	195.00

FOB: Santa Fe Springs, CA DELIVERY: Normally 1 - 2 Weeks
*All prices in U.S. Dollars. Prices and specifications subject to change without notice. Delivery times may change due to previous customer orders. Special packaging or electrical requirements for international shipments extra. For additional ordering information go to EMC Home Page)